Automotive Tools for Mechanics
Select a Page: 1 . . . 10 11 12 13 14 15 16 17 18 19 20 . . . 383
Jet 440435 Farm Jack
This rugged steel constructed jack has multiple uses to lift, push, pull, or clamp. The bar holes will accommodate chains, cable, etc. The large cast iron base provides stability while the safety shear pin protects the lifting saddle and dropping of load if the jack is overloaded.
This rugged steel constructed jack has multiple uses to lift, push, pull, or clamp. The bar holes will accommodate chains, cable, etc. The large cast iron base provides stability while the safety shear pin protects the lifting saddle and dropping of load if the jack is overloaded.
Price: $99.99
K-D Tools KD 104 Distributor Clamp Wrench
Reach around obstructions to turn the distributor lock nut with this double-ended wrench.Fits 1/2 and 9/16" lock nuts.Use an adapter to join wrenches or attach the wrench to a 3/8" ratchet or extension.
Reach around obstructions to turn the distributor lock nut with this double-ended wrench.Fits 1/2 and 9/16" lock nuts.Use an adapter to join wrenches or attach the wrench to a 3/8" ratchet or extension.
Price: $25.99
K-D Tools 135 Spark Plug Terminal Pliers
Safely remove spark plug cables and prevent cable damage.Pliers' handles and jaws are coated with a heavy-duy plastic for a sure grip.
Safely remove spark plug cables and prevent cable damage.Pliers' handles and jaws are coated with a heavy-duy plastic for a sure grip.
Price: $10.99
K-D Tools KD 2031 Exhaust and Tailpipe Cutter
Use tool to cut pipes 3/4" to 3" (19 to 76mm) in diameter.Fifteen blades effectively cut pipe so only 1/4 turn is needed for a complete cut.Patented, serviceable tool works in hard-to-reach areas.Will not cut double-wall pipes.Keep well oiled.Not for use on stainless steel.
Use tool to cut pipes 3/4" to 3" (19 to 76mm) in diameter.Fifteen blades effectively cut pipe so only 1/4 turn is needed for a complete cut.Patented, serviceable tool works in hard-to-reach areas.Will not cut double-wall pipes.Keep well oiled.Not for use on stainless steel.
Price: $32.99
K-D Tools 2038 Window Moulding Remover
Removes window molding clips on GM, Ford and AMC vehicles.Place jaw flat against glass. Locate clips and roll them out with tip, keeping jaw flat to glass.
Removes window molding clips on GM, Ford and AMC vehicles.Place jaw flat against glass. Locate clips and roll them out with tip, keeping jaw flat to glass.
Price: $11.99
K-D Tools KD 2043 Tapered Reamer
Tool reams as well as deburs, aligns and enlarges holes from 1/8" to 1/2".Accurately ground tempered steel with 3-1/2" blade.Always turn clockwise and use cutting oil for best results.Reamer comes with a comfortable plastic-grip handle.
Tool reams as well as deburs, aligns and enlarges holes from 1/8" to 1/2".Accurately ground tempered steel with 3-1/2" blade.Always turn clockwise and use cutting oil for best results.Reamer comes with a comfortable plastic-grip handle.
Price: $28.99
K-D Tools KD 2078 Universal Overhead Valve Spring Compressor
Remove valve springs on most cars with overhead valves without removing the cylinder head.Offset jaws grip the valve spring in parallel compression.Tool maintains constant length as spring is compressed.Use with 901 or 2992 Air Hold Fittings to keep valve in place.
Remove valve springs on most cars with overhead valves without removing the cylinder head.Offset jaws grip the valve spring in parallel compression.Tool maintains constant length as spring is compressed.Use with 901 or 2992 Air Hold Fittings to keep valve in place.
Price: $23.99
K-D Tools KD 2125 14 mm Cylinder Head Rethreader Kit
Repair damaged 14mm spark plug threads by opening hole with a reamer/tap and screwing insert onto the spark plug.Use spark plug socket to install spark plug and insert. Remove plug and check that insert is properly seated.Tap is designed for aluminum heads only.
Repair damaged 14mm spark plug threads by opening hole with a reamer/tap and screwing insert onto the spark plug.Use spark plug socket to install spark plug and insert. Remove plug and check that insert is properly seated.Tap is designed for aluminum heads only.
Price: $26.99
Select a Page: 1 . . . 10 11 12 13 14 15 16 17 18 19 20 . . . 383